Fuel injection system
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Engine unit › Fuel injection system
Tightening torquesFuel injection system
FUEL INJECTION SYSTEM
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Injection/ignition system control unit | Bolt | M6 x 1 | (air chamber side) 0.9 | 2.2 |
| Injection/ignition system control unit | Bolt | M6 | 0.8 ÷ 1.0 | 1.8 |
| Fuel manifold pipe | Bolt | M6 x 1 | (cylinder head side) 0.9 | 2.2 |
| Single fuel manifold pipe | Bolt | M6 | 0.8 ÷ 1.0 | 1.8 |
| Throttle body built into DVL | Bolt | M6 x 1 | (air chamber side) 0.9 | 2.2 |
| Throttle body built into DVL | Bolt | M6 | 0.8 ÷ 1.0 | 1.8 |
| Engine coolant temperature sensor | M12 x 1.5 | (thermostat unit side) 2.1 | 2.2 | |
| Engine coolant temperature sensor on radiator | M12 | 1.7 ÷ 2.0 | 1.8 | |
| Detonation sensor | Bolt | M8 | 1.5 ÷ 2.5 | 1.8 |
| Timing sensor | Bolt | M6 | 0.6 ÷ 0.8 | 1.8 |
Parts & tools for this job For 2005 Fiat Croma
- PARTFuel filterSearch: Fiat Croma 2005 fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.