Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Croma Factory Service Manual (2005-2010)19 · Wiring diagrams and electrical functions
19 · Electrical

Reversing lights - description

Make
Fiat
Model
Croma Factory Service Manual
Year
2005–2010
Section
Exterior lighting › Reversing lights - description
Wiring diagrams and electrical functionsReversing lights - description

REVERSING LIGHTS - DESCRIPTION

2.2, 1.9 JTD 8v, 1.9 JTD 16v, 2.4 JTD 20v

The vehicle is equipped with two reversing lights located in the tail-lights (mobile part on the boot).

The reversing lights are operated whenever reverse is engaged by means of the gear lever, whether the gearbox is manual or automatic (position R).

The reversing light circuit is supplied with power with the key inserted and turned ON (INT from steering lock control unit) and protected by a fuse in the underfacia junction unit.

The reversing light activation signal is managed by the Body Computer, which forwards this information:

- to the steering wheel stalk unit for automatic operation of the rear wiper

See E3021 REAR WINDOW WASH/WIPE

- to the electrochrome interior mirror and the driving attitude node for memorised adjustment of the passenger side door mirror

See E3032 DOOR MIRROR ADJUSTMENT

- to the parking sensor control unit

See E3090 PARKING SENSOR

- to Connect Nav +

See E4090 NAVIGATOR

1.8

The vehicle is equipped with two reversing lights located in the tail-lights (mobile part on the boot).

The reversing lights are operated whenever reverse is engaged via the gearlever.

The reversing light circuit is supplied with power with the key inserted and turned ON (INT from steering lock control unit) and protected by a fuse in the underfacia junction unit.

The reversing light activation signal is managed by the Body Computer, which forwards this information:

- to the steering wheel stalk unit for automatic operation of the rear wiper

See E3021 REAR WINDOW WASH/WIPE

- to the electrochrome interior mirror and the driving attitude node for memorised adjustment of the passenger side door mirror

See E3032 DOOR MIRROR ADJUSTMENT

- to the parking sensor control unit

See E3090 PARKING SENSOR

- to Connect Nav +

See E4090 NAVIGATOR

Parts & tools for this job For 2005 Fiat Croma

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.