4.2. Re-assembling (page 9 of 9)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Components internal to the gearbox
19 Gearbox4.2. Re-assembling · page 9 of 9
4.2. Re-assembling (page 9 of 9) – diagram from the 19 Gearbox chapter of the Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017) factory manual.
![Diagram showing tool [12] pressing bearing (3) onto a shaft above a gear](/fiat/ducato-2006-2017/assets/page_2282_fig01.png)
Figure : B2CM04JD
Fit the bearing (3); Using tool [12] and press.
![Diagram showing tool [12] pressing bearing (1) and speedometer drive gear (2) onto a shaft above a gear](/fiat/ducato-2006-2017/assets/page_2282_fig02.png)
Figure : B2CM04KD
Refit :
- The speedometer drive gear (2)
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Ducato
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.