22 · Diagnostics

Doors open check not working

Make: Fiat
Model: Idea Factory Service Manual
Year: 2003–2012
Section: Instrument panel › Doors open check not working

‹ Prev Doors open check warning light on Next › Mil warning light does not work

Fault diagnosisDoors open check not working

DOORS OPEN CHECK NOT WORKING

The special warning light/symbol in the instrument panel is not displayed when one of the doors is opened.

The interior lights do not work properly when one of the doors is opened

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Connect the EXAMINER diagnostic equipment and check the CAN NETWORK INFORMATION: For inactive control units For control units with errors For control units with CAN errors	Continue to Step 1	Presence of faults in the CAN network	Continue as instructed by the tester
		Continue to Step 1	Impossible to converse with the Body Computer	Continue to Step 7
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the Examiner to the diagnostic socket Check that there are no faults in the Body Computer	Continue to Step 2	There are faults in the Body Computer	Proceed in accordance with the instructions provided by the instrument
2	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
Two-zone climate control system	Keeping the Examiner equipment connected to the diagnostic socket, check that there are no faults at the Driver's Door Node	Continue to Step 3	There are faults in the Driver's Door Node	Proceed in accordance with the instructions provided by the instrument
Two-zone climate control system	Keeping the Examiner diagnostic equipment connected to the diagnostic socket check that there are no faults in: Driver's/Passenger Door Nodes Luggage Compartment Node	Continue to Step 3	There are faults in the Driver's Door Node	Proceed in accordance with the instructions provided by the instrument
Two-zone climate control system		Continue to Step 3	There are faults in the Luggage Compartment Node	Proceed in accordance with the instructions provided by the instrument
3	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the Examiner diagnostic equipment connected to the diagnostic socket check that there are no faults at the Instrument Panel	Continue to Step 4	There are faults in the instrument panel	Proceed in accordance with the instructions provided by the instrument
4	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the Examiner connected to the diagnostic socket, check the operation of the warning light in active diagnosis	Continue to Step 5	Warning light not working	Replace instrument panel Op. 5560B11
5	CHECKING ELECTRICAL EQUIPMENT	All OK	Problems met	Operation
Two-zone climate control system	Check the connections between the Body Computer, Driver's Door Node, instrument panel and switches in the locks See E3040 CENTRAL LOCKING	Continue to Step 6	Connections not correct	Restore the correct connections: See E3040 CENTRAL LOCKING
Two-zone climate control system	Check the connections between the Body Computer, Driver's/Passenger Door Nodes, Luggage Compartment Node, instrument panel and switches in the locks See E3040 CENTRAL LOCKING	Continue to Step 6	Connections not correct	Restore the correct connections: See E3040 CENTRAL LOCKING
6	SWITCH CHECK	All OK	Problems met	Operation
	Check the operation of the switches in the locks	Continue to Step 7	Front door lock switch defective	Replace the lock Op. 7005N21
			Rear door lock switch defective	Replace the lock Op. 7010N21
			Luggage compartment lock with faulty switch	Replace the lock Op. 7015B10
7	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present with any of the doors open	End of diagnosis	The fault persists	Replace the Body Computer Op. 5505A32

‹ Prev Doors open check warning light on Next › Mil warning light does not work

Parts & tools for this job For 2003 Fiat Idea

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.