General failure warning light not working
- Make
- Fiat
- Model
- Idea Factory Service Manual
- Year
- 2003–2012
- Section
- Instrument panel › General failure warning light not working
‹ Prev Seat belt not fastened warning light not workingNext › General failure warning light on constantly
Fault diagnosisGeneral failure warning light not working
GENERAL FAILURE WARNING LIGHT NOT WORKING
Even if the fault for one of the functions is signalled by the general failure warning light, the warning light in the instrument panel does not come on
The following functions cause the activation of the general failure warning light:
- Inertia switch operation (FIS)
- Exceeding of speed limit
- Diesel filter sensor failure (JTD only)
- Engine oil pressure sensor failure
- Rain sensor failure (if fitted)
- Parking sensor failure (if fitted)
- Dusk sensor failure (if fitted)
- Window anti-crush safety system failure (HIGH version only)
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect the diagnostic equipment and check the operation of the general failure warning light atn the instrument panel node through active diagnosis | End of diagnosis | The warning light is not activated | Replace the instrument panel Op. 5560B11 | |
‹ Prev Seat belt not fastened warning light not workingNext › General failure warning light on constantly
Parts & tools for this job For 2003 Fiat Idea
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Idea
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.