22 · Diagnostics

Milometer not working

Make: Fiat
Model: Idea Factory Service Manual
Year: 2003–2012
Section: Instrument panel › Milometer not working

‹ Prev Speedometer not working Next › Trip meter does not zero

Fault diagnosisMilometer not working

MILOMETER NOT WORKING

The milometer either does not work or does not work properly whilst driving.

The speedometer works properly. If the speedometer is faulty, see Table K003.

0	PRELIMINARY CHECK	All OK	Problems met	Operation
		Results of the tests
1.3 JTD 16v	Check: That the instrument panel light dimmer has not been selected. That the mode button has not been pressed. That there are no failure messages displayed.	Continue to Step 1	The display shows other information.	Restore the display conditions using the control panel
1.3 JTD 16v	That the mode button has not been pressed.	Continue to Step 1	The display shows other information	Restore the display conditions using the control panel
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the Examiner to the diagnostic socket. Check that there are no faults in the instrument panel	Continue to Step 2	There are errors	Proceed in accordance with the instructions given by the diagnostic equipment
2	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the Examiner connected to the diagnostic socket, check the operation of the display in active diagnosis.	Continue to Step 3	Milometer not working	Replace instrument panel Op. 5560B11
3	CHECK ON ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Check connections between instrument panel Body Computer and ABS control unit	Continue to Step 4	Faulty wiring	Restore/replace the wiring: See E4010 INSTRUMENT PANEL
4	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	With the diagnostic equipment (Examiner or other instruments) connected, check the CAN information: For inactive control units; That there are no control unit errors; That there are no control units with CAN line errors	Continue to Step 5	Presence of faults	Continue following the instructions for the diagnostic equipment
5	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis

‹ Prev Speedometer not working Next › Trip meter does not zero

Parts & tools for this job For 2003 Fiat Idea

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.