Installation

Installation

1108 Euro 3

• Fit the coolant supply pipe to the reservoir.
• Fit the coolant reservoir and fix it using the bolts.
• Fit the coolant return pipe to the reservoir.
• Fit the coolant return pipe.
• Refill the cooling system with coolant.

• Remove the protective bodywork covers.
• Close the bonnet lid.

1088B24 - ENGINE COOLING RADIATOR - R R FOR AIR CONDITIONED VERSIONS

Removal

1108 Euro 3

• Position the vehicle on the ramp.
• Open the bonnet.
• Fit the protective bodywork covers.
• Disconnect the battery negative (-) terminal.

• Raise the vehicle.

1. Undo the bolts securing the engine compartment guard.
2. Remove the engine compartment guard.

1108 Euro 3

• See Op. 4450B12 Front or rear wheels (two) - r+r
• See Op. 7055B42 Supplementary wheel arch (one) - r+r
• See Op. 7210E10 Front bumper
• Undo the engine coolant reservoir cap.

1. Disconnect the lower coolant outlet hose from the radiator and drain the engine coolant into a suitable container.
2. Remove the upper coolant hose from the radiator.

1108 Euro 3

1. Disconnect the electrical connector for the engine cooling fan motor and remove the electrical wiring band.