Removal

1. Remove the lower coolant hose from the radiator and drain the fluid into a suitable container.

Removal

• Fit the lower coolant hose to the radiator and fix it with the band.
• See Op. 1032D35 Complete timing covers - r r for versions with air conditioner
• See Op. 1032B14 Toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner

1. Undo the bolts (1a) and nut (1b).
2. Remove the water pump.

Installation

1. Apply a 2.5 mm bead of sealant along the entire perimeter of the pump casing.

Note: Before fitting the water pump, use a sharp knife to trim away any surplus silicone on the edges of the sealed areas (pump casing - engine block), and remove the traces of coolant with a dry rag.

Apply sealant continuously (without interruptions) and make a perfect join between the beginning and end.

• Fit the water pump to the engine.

When fitting the water pump, avoid movements which could remove the sealant.

• Tighten the bolts and nut on the water pump to torque.

• See Op. 1032B14 Toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner
• See Op. 1032D35 Complete timing covers -r r for versions with air conditioner