Installation
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Engine cooling (1108 Euro 3) › Installation
10 EngineInstallation
Installation
1108
Euro 3
- Fit the thermostat with the new gasket and fix it using the bolts.
- Fit the upper radiator hose to the thermostat unit.
- Fit the ignition coils mounting and fix it with the bolt.
- See Op. 5510C10 Ignition coil/s - r+r
- See Op. 1048A28 Vacuum air circuit resonator pipe - r+r
- Fit engine compartment guard and fix it using the bolt.
- Connect the negative (-) battery terminal.
| Description | Connector |
|---|---|
| - Battery | A1 |
Refill the engine cooling system with coolant.
| Type | Component | Description | Q.ty. |
|---|---|---|---|
| - Liquid | ENGINE COOLING CIRCUIT | Paraflu' 11 | 4.6 |
- Remove the protective bodywork covers.
- Close the bonnet lid.
- Remove the car from the ramp.
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.