4110d20 - electrical steering device - r.r.

4110D20 - ELECTRICAL STEERING DEVICE - R.R.

Removal

• Open the engine compartment.
• Disconnect the battery (-) and (+) terminals.

• Perform Op. 7040A26 STEERING COLUMN PANEL - R.R.
• Perform Op. 4110A10 STEERING WHEEL - R.R. for replacements or checks.

or

• Perform Op. 4110A11 STEERING WHEEL - R.R. for replacements or checks for versions with AIRBAG.
• Perform Op. 5580C18 MODULE for AIR BAG - R+R.
• Perform Op. 5550A12 STEERING COLUMN STALKS complete - R+R. for versions with AIR BAG.
• Perform Op. 7040A26 STEERING COLUMN PANEL - R.R.
• Perform Op. 5560B10 ANALOGUE INSTRUMENT PANEL - R.R.
• Perform Op. 7065C10 CLIMATE CONTROL SYSTEM PLATE - R.R.
• Perform Op. 7040A37 FUSE COVER ON DASHBOARD - R.R.
• Perform Op. 5010C38 SIDE AIR VENT (ONE), LH or RH, ON DASHBOARD - R.R.
• Perform Op. 7040L40 FRONT DOOR FRAME FOOTBOARD (ONE), LH or RH, - R.R.
• Disconnect the ignition switch electrical connections.

• Remove the Fiat CODE system ring aerial from the ignition switch.
• Mark the position of the steering shaft joint with respect to the steering unit pinion.

1. Loosen the nut (1a) and remove the screw (1b) fastening the steering shafts.

1 Disconnect the steering sensor (1a) and steering motor electrical connections (1b).

1. Loosen the screws (1a) and the nuts (1b) fastening the power steering device and remove it.

(Continued)