Fiat
Seicento Factory Service Manual (1998-2010)
41 Steering
Steering control and linkage
Operations
07 · Steering & suspension
Operations
Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Steering control and linkage › Operations
41 Steering Operations
OPERATIONS
4110A10 - STEERING WHEEL - R+R. FOR REPL. OR CHECKS
Removal
Open the engine compartment.
Disconnect the battery(-) terminal
Description Connector
- Battery A1
Carry out Op. 5550B10 Horn CONTROL on steering wheel - R+R.
Disconnect the electrical connection of the horn
Description Connector
1 One-tone horn P5
Slacken the nut fastening the steering wheel.
Remove the steering wheel and the horn contacts lockring.
Notea: Before removing the steering wheel, mark its position in relation to the steering shaft.
Reassembly
Re-position the horn contacts lockring and the steering wheel in the original position.
Tighten the steering wheel fastening nut to the specified torque
Fastening Component Ø Value (daNm)
- Nut STEERING WHEEL M16 5.0
Connect the electrical connection of the horn
Description Connector
- One-tone horn P5
Complete with Op. 5550B10 Horn CONTROL on steering wheel - R+R.
Connect the battery (-) terminal
Description Connector
- Battery A1
Close the engine compartment.
4110A11 - STEERING WHEEL - R+R. FOR REPL. OR CHECKS FOR VERSIONS WITH AIR BAG
Removal
Open the engine compartment.
Disconnect the battery (-) and (+) terminals
Description Connector
- Battery A1
Carry out Op. 7040A26 Steering column COVER - R+R.
Carry out Op. 5580C18 MODULE for AIR BAG - R+R.
Disconnect the electrical connection of the horn
Description Connector
1 One-tone horn P5
Slacken the nut fastening the steering wheel.
Remove the steering wheel and the horn contacts lockring
(Cont.d)
07 Steering & suspension
Parts & tools for this job For 1998 Fiat Seicento Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.