Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)07 · 41 Steering
07 · Steering & suspension

Reassembly

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Steering control and linkage › Reassembly
41 SteeringReassembly

( Cont.d Op. 4110B10)

  1. Slacken the nuts of the adjustable track rod articulated heads.
Diagram showing the adjustable track rod articulated head (1) and nut (2) being separated from the front hub upright.
  1. Separate the adjustable track rod articulated heads from the front hub uprights using the tool
DescriptionCode
1Puller1.847.035.000
Diagram showing a puller tool (1) separating an adjustable track rod from the steering rack.
  • Slacken the adjustable track rods and remove them.
  • Slacken and remove the nuts locking the adjustable steering track rods.

Reassembly

  • Tighten the nuts locking the adjustable steering track rods.
  • Tighten the adjustable steering track rods to the dimensions noted before removal.
  • Connect the adjustable track rod articulated heads to the front hub uprights and tighten the fastening nuts to the specified torque
FasteningComponentØValue (daNm)
-NutADJUSTABLE TRACK ROD ARTICULATED HEADSM103.4
  • Check that the lengths of the adjustable steering track rods are as measured during removal.
  • Tighten the adjustable steering track rod locking nuts to the specified torque
FasteningComponentØValue (daNm)
-NutADJUSTABLE STEERING TRACK RODSM123.4
  • Complete with Op. 4450B12 Front WHEELS (two)
    - R.R.
  • Lower the vehicle and remove it from the lift.

4110B14 - STEERING TRACK RODS - R+R. WITH STEERING BOX REMOVED

Removal

  • Note the lengths of the steering track rods to be used for refitting.
  1. Slacken the nuts locking the adjustable steering track rods.
  2. Slacken the adjustable steering track rods and remove them.
Diagram showing the adjustable steering track rod (1) and nut (2) being separated.
  • Slacken the and remove the nuts locking the adjustable steering track rods.

(Cont.d.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.