Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)07 · 41 Steering
07 · Steering & suspension

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Steering control and linkage › Refitting
41 SteeringRefitting

( Op. 4110D50 continued)

Name Connector
1a Steering sensor K58
1b Electrical steering motor N95
Diagram showing the wiring harness and connectors for the steering sensor (1a) and electrical steering motor (1b) located near the steering column.
  • Lift the wiring harness from the clips and remove it.

Refitting

  • Reposition the wiring harness and fit it in the fastening clips.
  • Connect the steering sensor and steering motor electrical connections.
Name Connector
- Steering sensor K58
- Electrical steering motor N95
  • Connect the electrical steering ECU electrical connections.
Name Connector
- Electrical steering ECU M86
  • Position the earth wire on the ECU bracket and fasten it with its nut.
Name Connector
- Electrical steering earth C14
  • Reposition the diagnostic socket in the support on the ECU.
  • Reposition the lower dashboard panel, right-hand side.
  • Complete with Op. 7040L40 FRONT DOOR FRAME FOOTBOARD (ONE), LH or RH, - R.R.
  • Complete with Op. 5010C38 SIDE AIR VENT (ONE), LH or RH, ON DASHBOARD - R.R.
  • Complete with Op. 7040A37 FUSE COVER ON DASHBOARD - R.R.
  • Complete with Op. 7065C10 CLIMATE CONTROL SYSTEM PLATE - R.R.
  • Complete with Op. 5560B10 ANALOGUE INSTRUMENT PANEL - R.R.
  • Complete with Op. 5550A12 STEERING COLUMN STALKS complete - R+R. for versions with AIR BAG.
  • Complete with Op. 4110A10 STEERING WHEEL - R.R. for replacements or checks.

or

  • Complete with Op. 4110A11 STEERING WHEEL - R.R. for replacements or checks for versions with AIRBAG.
  • Complete with Op. 5580C18 MODULE for AIR BAG - R+R.
  • Complete with Op. 7040A26 STEERING COLUMN PANEL - R.R.
  • Fit the electrical steering system fuse in the fuse group.
Name Connector
- Electrical steering ECU fuse B53
  • Connect the electrical steering wiring harness positive terminal to the positive battery terminal.
Name Connector
- Battery A1
  • Fit the fuse group on the rear of the battery frame.
  • Complete with Op. 5530B10 BATTERY - R.R.
  • Close the engine compartment.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.