Refitting (page 2 of 2)

(Cont. Op. 4110D50)

1. Fit the electrical steering system fuse (1a) from the fuse group and separate the positive terminal (1b) from the electrical steering wiring harness from the positive battery terminal.

• Perform Op. 7040A26 STEERING COLUMN PANEL - R.R.
• Perform Op. 4110A10 STEERING WHEEL - R.R. for replacements or checks.

• Perform Op. 4110A11 STEERING WHEEL - R.R. for replacements or checks for versions with AIRBAG.
• Perform Op. 5580C18 MODULE for AIR BAG - R+R.
• Perform Op. 5550A12 STEERING COLUMN STALKS complete - R+R. for versions with AIR BAG.
• Perform Op. 7040A26 STEERING COLUMN PANEL - R.R.
• Perform Op. 5560B10 ANALOGUE INSTRUMENT PANEL - R.R.
• Perform Op. 7065C10 CLIMATE CONTROL SYSTEM PLATE - R.R.
• Perform Op. 7040A37 FUSE COVER ON DASHBOARD - R.R.
• Perform Op. 5010C38 SIDE AIR VENT (ONE), LH or RH, ON DASHBOARD - R.R.
• Perform Op. 7040L40 FRONT DOOR FRAME FOOTBOARD (ONE), LH or RH, - R.R.
• Lift the lower dashboard panel, right-hand side.

1. Remove the diagnostic socket (1a) from the support on the ECU (1b).
2. Loosen the nut (2a) fastening the ECU earth (2b).

1. Disconnect the electrical steering ECU electrical connections.

1. Disconnect the steering sensor (1a) and steering motor (1b) electrical connections.

(Cont.d)