5530a10 - alternator - r.r.
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Current generation (1108) › 5530a10 - alternator - r.r.
55 Electrical equipment5530a10 - alternator - r.r.
5530A10 - ALTERNATOR - R.R.
Removal
- Position the vehicle on a shop jack.
- Raise the car.
- Remove the nut (1a) and disconnect the electric wire (1b) from the alternator positive terminal.
| Name | Connector | |
|---|---|---|
| 1b | Alternator | A10A |
- Disconnect the electric connection.
| Name | Connector | |
|---|---|---|
| 2 | Alternator | A10B |
Perform Op. 7055B64 - ENGINE COMPARTMENT DUST PROTECTION IN FRONT WHEELHOUSE (ONE), LH OR RH - R.R.
- Loosen fastening screw (1a), shift the alternator slightly (1b) to remove drive belt (1c).
- Remove the two screws (1a - 1b) fastening the alternator to the engine.
- Remove the alternator.
Refitting
- Position the alternator, screw the fastening screws to the engine.
| Attachment | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| - | Screw | Complete alternator | M10x | 4.5 - 6.5 1.25 |
- Fit the drive belt.
- Complete with Op. 1092B64 - ALTERNATOR DRIVE BELT - TENSION ADJUSTMENT.
- Complete with Op. 7055B64 - ENGINE COMPARTMENT DUST PROTECTION IN FRONT WHEELHOUSE (ONE), LH OR RH - R.R.
- Reconnect the electric connection.
- Reconnect the electric wire to the positive alternator terminal and screw the fastening nut.
Do not start the engine if the recharging circuit electric connections are provisional or loose. This could damage the alternator diodes.
Do not perform tests on the electronic regulator with warning lights. This could damage the regulator.
Parts & tools for this job For 1998 Fiat Seicento
- TOOLBattery testerSearch: car battery tester
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBattery terminal cleanerSearch: battery terminal cleaner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.