Removal
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Current generation (1108) › Removal
55 Electrical equipmentRemoval
Removal
- Position the vehicle on a shop jack.
- Raise the vehicle.
- Unscrew nut (1a) from the starter motor electric cable (1b) that arrives from the starter battery.
| Name | Connector | |
|---|---|---|
| 1b | Starter motor | A20A |
- Remove the nut (1a) and disconnect the electric wire (1b) from the alternator positive terminal.
| Name | Connector | |
|---|---|---|
| 1b | Alternator | A10A |
- Lower the vehicle.
- Take out the covering hood from the starter battery positive terminal.
- Unscrew the two nuts (2a)and disconnect the electric cables (2b)
- Loosen the screw, take out the terminal fastened to the positive pole of the starter battery.
| Name | Connector | |
|---|---|---|
| 3 | Starter battery | A1A |
- Remove the cable between the battery and the starter motor from the engine compartment.
Refitting
- Fit the terminal on the starter battery positive pole and tighten the fastening nut.
| Attachment | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| - | Nut | STARTER BATTERY CABLE TERMINAL | M6 | 0.37÷0.53 |
(Continued)
Parts & tools for this job For 1998 Fiat Seicento
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.