5530b60 - belt/battery retaining fastening - replace
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Current generation (1108) › 5530b60 - belt/battery retaining fastening - replace
55 Electrical equipment5530b60 - belt/battery retaining fastening - replace · page 1 of 2
(Cont. Op. 5530B26)
- Reconnect the electric cables on the positive terminal of the starter battery and tighten the two fastening nuts.
| Attachment | Component | Ø | Value (daNm) |
|---|---|---|---|
| Nut | STARTER BATTERY CABLE TERMINAL | M6 | 0.46÷0.66 |
- Fit the cap on the positive battery terminal.
- Raise the vehicle.
- Reconnect the electric wire to the positive alternator terminal and screw the fastening nut.
| Attachment | Component | Ø | Value (daNm) |
|---|---|---|---|
| Nut | STARTER MOTOR | M8 | 0.9÷1.4 |
- Reconnect the starter motor electric cable and tighten the fastening nut.
| Attachment | Component | Ø | Value (daNm) |
|---|---|---|---|
| Nut | ALTERNATOR | M6 | 0.41÷0.60 |
899
1108
5530B60 - BELT/BATTERY RETAINING FASTENING - REPLACE
- Remove the two nuts (1a) fastening the anchoring tierods (1b) to the battery basket. Remove the bracket (1c) and tierods.
Parts & tools for this job For 1998 Fiat Seicento
- TOOLBattery testerSearch: car battery tester
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBattery terminal cleanerSearch: battery terminal cleaner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.