B10 The engine does not start in any condition (page 3 of 3)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Starting
DiagnosisB10 The engine does not start in any condition · page 3 of 3
(continued The engine does not start, in any condition)
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| All OK | Problems found | Intervention | |||
| 6 | CHECK FUEL PRESSURE Check fuel supply pressureOP. PROCEDURE 0510C10 |
Go to Step 7 | Incorrect pressure | Check, and - if required - replace the following circuit components, in sequence: - fuel filter OP. PROCEDURE 1044B10 - pressure regulator - fuel pipes PROCEDURE 1040 B |
|
| 7 | CHECK CORRECT OPERATION Check the fault is no longer present |
End of test | - | - | |
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.