B11 The engine does not start easily when warm (page 2 of 2)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Starting
‹ Prev B11 The engine does not start easily when warmNext › B12 The engine does not start easily when cold
DiagnosisB11 The engine does not start easily when warm · page 2 of 2
(continued The engine does not start easily when warm)
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 3 | CHECK FUEL PRESSURE | Check the fuel supply pressure OP. PROCEDURE 0510C10 | All OK Go to Step 4 |
Problems found Incorrect pressure |
Intervention Check in sequence: – fuel filter OP. PROCEDURE 1044B10 – pressure regulator – fuel pipes PROCEDURE 1040 B |
| 4 | CHECK CYLINDER COMPRESSION | Perform the cylinder compression test OP. PROCEDURE 0510A10 | All OK Go to Step 5 |
Problems found Incorrect compression values |
Intervention Restore correct cylinder compression |
| 5 | CHECK CORRECT OPERATION | Check the fault is no longer present | All OK End of test |
Problems found – |
Intervention – |
‹ Prev B11 The engine does not start easily when warmNext › B12 The engine does not start easily when cold
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.