REVERSING LIGHTS - Functional description

3 doors, 5 doors

Functional description

The switch for the reversing lights I20 is supplied when the ignition is switched on (INT/A) from the line protected by fuse F31for the junction unit B2 under the facia.

When reverse gear is engaged, the switch closes and send the supply to the reversing light in the tail-light cluster F30 (left) F31 (right) directly via the control unit B2 - pins 7 and 8 connector D.

The reversing light activation signal is sent to the Body Computer M1 - pin 3 of connector F - and from there to the steering column switch unit H5 to turn on the rear wiper See E3021 REAR WINDOW WASH/WIPE automatically; it is also sent, via the CAN line, to the parking sensor control unit M84See E3090 PARKING SENSOR e navigator connector See E4091 CONNECT.

S.W.

Functional description

The switch for the reversing lights I20 is supplied when the ignition is switched on (INT/A) from the line protected by fuse F31for the junction unit B2 under the facia.

When reverse gear is engaged, the switch closes and send the supply to the reversing light in the rear light clusters on the boot F35 (left) F36 (right) directly via the control unit B2 - pins 7 and 8 connector D.

The reversing light activation signal is sent to the Body Computer M1 - pin 3 of connector F - and from there to the steering column switch unit H5 to turn on the rear wiper See E3021 REAR WINDOW WASH/WIPE automatically; it is also sent, via the CAN line, to the parking sensor control unit M84See E3090 PARKING SENSOR e navigator connector See E4091 CONNECT.