Brake lights operational description
- Make
- Fiat
- Model
- Ulysse Factory Service Manual
- Year
- 2002–2010
- Section
- Exterior lighting › Brake lights operational description
Wiring diagrams and electrical functionsBrake lights operational description
BRAKE LIGHTS OPERATIONAL DESCRIPTION
Operational Description
The brake lights command comes from the brake pedal switch I030, connected to the body computer node M001 at pin 2 of connector B and is supplied directly by the ignition switch H001.
When the pedal is pressed, supplies are sent to the left rear light cluster F030, from pin 1 of connector H of the body computer node M001, via the line for fuse F05 and to the right rear light cluster F031 and the third brake light F040, from pin 10 of connector H of M001, via the line for fuse F17.
Parts & tools for this job For 2002 Fiat Ulysse
- PARTBrake padsSearch: Fiat Ulysse 2002 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.