Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Ulysse Factory Service Manual (2002-2010)19 · Wiring diagrams and electrical functions
19 · Electrical

Rear fog lamps description

Make
Fiat
Model
Ulysse Factory Service Manual
Year
2002–2010
Section
Exterior lighting › Rear fog lamps description
Wiring diagrams and electrical functionsRear fog lamps description

REAR FOG LAMPS DESCRIPTION

2.0 16V JTD, 2.2 16V JTD · MY 2005

The vehicle is equipped with two rear fog lights located in the rear light clusters.

The rear fog lamps are activated via the special ring nut control on the stalk unit (steering wheel node); when the lights are on, the warning light in the instrument panel comes on.

The switching on of the rear fog lamp is managed by the Body Computer; it is activated by:

  • enablement signal with key in position M;
  • control signal coming from the steering column switch unit ring nut;
  • side lights on signal;
  • headlamp signal (dipped or main beams), or fog lights on.

If one of the enablement signals fails, the ring nut must be turned again to switch on the rear fog lamps.

Parts & tools for this job For 2002 Fiat Ulysse

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.