Reversing lights description
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Interior lighting › Reversing lights description
REVERSING LIGHTS DESCRIPTION
Description
The vehicle is equiped with two reversing lights located at the rear in the centre (on the boot).
The circuit for the reversing lights is supplied with the key-on (INT) and is protected by a special fuse in the junction unit under the dashboard.
The signal that the reversing light has come on is managed by the Body Computer which sends this information to the roof control unit to activate the interior mirror electro-chromic function. This produces maximum visibility because the mirror is completely cleared. The roof control unit also supplies and inhibits the obscuring of the interior mirror; the latter, in turn, directly manages the obscuring of the exterior mirrors.
See E3032 DOOR MIRROR ADJUSTMENT
The info-telematic control unit receives the information that reverse gear is engaged via the CAN for the navigation function Wiring diagram E4090.
Description
The vehicle is equiped with two reversing lights located at the rear in the centre (on the boot).
These are operated whenever reverse is engaged via a switch on the outside of the gear housing.
The circuit for the reversing lights is supplied with the key-on (INT) and is protected by a special fuse in the junction unit under the dashboard.
The signal that the reversing light has come on is managed by the Body Computer which sends this information to the roof control unit to activate the interior mirror electro-chromic function. This produces maximum visibility because the mirror is completely cleared. The roof control unit also supplies and inhibits the obscuring of the interior mirror; the latter, in turn, directly manages the obscuring of the exterior mirrors.
See E3032 DOOR MIRROR ADJUSTMENT
The info-telematic control unit receives the information that reverse gear is engaged via the CAN for the navigation function Wiring diagram E4090.
Description
The vehicle is equiped with two reversing lights located at the rear in the centre (on the boot).
The circuit for the reversing lights is supplied with the key-on (INT) and is protected by a special fuse in the junction unit under the dashboard.
The signal that the reversing light has come on is managed by the Body Computer which sends this information to the roof control unit to activate the interior mirror electro-chromic function. This produces maximum visibility because the mirror is completely cleared. The roof control unit also supplies and inhibits the obscuring of the interior mirror; the latter, in turn, directly manages the obscuring of the exterior mirrors.
See E3032 DOOR MIRROR ADJUSTMENT
The info-telematic control unit receives the information that reverse gear is engaged via the CAN for the navigation function.
Description
The vehicle is equiped with two reversing lights located at the rear in the centre (on the boot). The circuit for the reversing lights is supplied with the key-on (INT) and is protected by a special fuse in the junction unit under the dashboard.
The signal that the reversing light has come on is managed by the Body Computer which sends this information to the roof control unit to activate the interior mirror electro-chromic function.
This produces maximum visibility because the mirror is completely cleared.
The roof control unit also supplies and inhibits the obscuring of the interior mirror; the latter, in turn, directly manages the obscuring of the exterior mirrors.
See E3032 DOOR MIRROR ADJUSTMENT
The info-telematic control unit receives the information that reverse gear is engaged via the CAN for the navigation function.
Parts & tools for this job For 2002 Lancia Thesis
- PARTReplacement bulbsSearch: Lancia Thesis 2002 bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.