Workshop Manuals Factory service & repair Land Rover
01 300 TDi Diesel Engine Overhaul Manual02 INTRODUCTION03 DESCRIPTION AND OPERATION04 OVERHAUL05 DATA, TORQUE & TOOLS
Land Rover 300Tdi Engine04 · OVERHAUL
04 · General

Timing belt tensioner and gears - refit

Make
Land Rover
Model
Engines 300Tdi Engine
Section
TIMING BELT, TENSIONER AND GEARS › Timing belt tensioner and gears - refit
OVERHAULTiming belt tensioner and gears - refit · page 1 of 2
Timing belt tensioner and gears - refit – Land Rover 300Tdi Engine

ENGINE

6

OVERHAUL

Timing belt tensioner and gears - refit

1. Smear a new ’O’ ring with engine oil and fit to

crankshaft.

2. Fit Woodruff key in slot in crankshaft.
3. Fit crankshaft gear on to crankshaft and using

a soft mallet, tap gear fully home.

4. Position camshaft timing gear and hub plate to

camshaft, fit bolt and washer, finger tighten
bolt. Do not tighten bolt at this stage.

NOTE: Later engines are fitted with a
flange head bolt.

5. Position fuel injection pump gear and hub plate

to fuel injection pump hub ensuring that cut-out
in hub plate is aligned with timing pin hole in
pump hub.

6. Fit 3 bolts, position slots in gear mid-way under

bolt heads, lightly tighten bolts.

CAUTION: Do not fit bolts through
elongated slots in hub plate. Ensure gear
does not move as bolts are tightened.

7. Insert timing pin LRT-12-045 in hub plate and

injection pump hub. If timing pin cannot be
inserted, slacken bolts and rotate gear until pin
can be fitted, lightly tighten bolts.

Parts & tools for this job For Land Rover Engines

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.