TD5 Defender
19
FUEL SYSTEM
2
REPAIR
SWITCH - INERTIA - FUEL CUT OFF
Service repair no - 19.22.09
Remove
1. Disconnect multiplug from fuel cut off switch.
2. Remove 2 screws securing switch to bulkhead.
3. Remove switch.
Refit
4. Position switch to bulkhead.
5. Fit screws securing switch to bulkhead.
6. Connect multiplug.
7. Press top of switch to set switch.
SENSOR - MASS AIR FLOW (MAF)
Service repair no - 19.22.25
Remove
1. Disconnect multiplug from MAF sensor.
2. Loosen clip screw and release air intake hose
from MAF sensor.
3. Release 2 clips and remove sensor from air
cleaner.
Refit
4. Position sensor to air cleaner and secure clips.
5. Position air intake hose and tighten clip screw.
6. Connect multiplug.