TD5 Defender
FUEL SYSTEM
7
REPAIR
Refit
7. Clean air flow meter faces.
8. Fit new ’O’ ring to air filter.
9. Clean AAP sensor.
10. Using new ’O’ ring, fit AAP sensor and tighten
screws.
11. Position air filter assembly and secure in
grommets.
12. Position air flow meter and secure clips.
13. Position intake hose to air filter and tighten clip
screw.
INJECTOR - SET
Service repair no - 19.60.12
Remove
1. Remove cooling fan. See COOLING SYSTEM,
Repair.
2. Remove rocker shaft. See ENGINE , Repair.
3. Position container to catch fuel spillage.
4. Disconnect quick release fuel hose connectors
from fuel connector block on cylinder head and
fuel cooler to drain fuel from cylinder head.
5. Disconnect 5 multiplugs from injectors.
6. Remove Torx bolt securing injector unit to
cylinder head.