Discovery II
ENGINE MANAGEMENT SYSTEM - V8
18-2-98 REPAIRS
ECU - Cruise control
$% 19.75.49
Remove
1. Remove fixings securing fascia RH closing
panel and remove panel.
2. Remove 2 fixings and remove 'A' post lower
trim.
3. Remove 2 nuts and remove ECU from studs.
4. Disconnect multiplug from ECU and remove
ECU.
Refit
1. Position new ECU and connect multiplug.
2. Fit ECU to studs and secure with nuts.
3. Fit lower trim panel to 'A' post and secure with
fixings.
4. Fit closing panel and secure with fixings.
5. Programme the ECU using TestBook.