L322 Range Rover Service Procedures
TRANSFER BOX
REPAIRS
41-13
Damper - vibration - Td6
$% 41.20.85
Remove
1. Remove front propeller shaft.
DRIVESHAFTS, REPAIRS, Propeller
2. Remove 3 Torx screws securing mass damper
and remove damper.
Refit
1. Clean damper and mating face.
2. Fit damper and tighten Torx screws to 23 Nm
(17 lbf.ft).
3. Fit front propeller shaft.
DRIVESHAFTS, REPAIRS, Propeller
Electronic control unit (ECU) - transfer
gearbox
$% 41.30.01
If the ECU is to be replaced then Testbook/T4 must
be connected and correct procedures adhered to,
prior to battery disconnection.
Remove
1. Remove battery.
2. Release clips securing ECU cover to bulkhead.
Remove cover.
3. Release 2 clips securing ECU to bulkhead
mounting bracket.
4. Release ECU from mounting, disconnect 3
multiplugs and remove ECU.
M41 7832
M41 7823