Range Rover P38
BMW DIESEL
11
REPAIR
INTAKE AIR TEMPERATURE SENSOR (IAT
SENSOR) - VEHICLES WITHOUT EGR
Service repair no - 18.30.09
Remove
1. Disconnect multiplug.
2. Remove sensor from intake manifold. Discard
sealing washer.
Refit
3. Ensure mating faces are clean.
4. Using a new sealing washer, fit sensor to intake
manifold. Tighten to
14 Nm (10 lbf.ft)
5. Connect multiplug.
MANIFOLD ABSOLUTE PRESSURE (MAP)
SENSOR
Service repair no - 19.42.34
Remove
1. Disconnect multiplug from sensor.
2. Remove nut and bolt. Release sensor from
bracket.
3. Release clip. Remove sensor from hose.
Refit
4. Reverse removal procedure.
