Range Rover P38
TRANSFER BOX
7
REPAIR
9. Raise lift. Drain gearbox and transfer box oil.
See SECTION 10, Maintenance.
10. Support transmission with cross beam.
11. Remove exhaust front pipe.
See MANIFOLD
AND EXHAUST SYSTEM, Repair.
12. Diesel Vehicles. Remove chassis cross
member.
See CHASSIS AND BODY, Repair.
13. Release hand brake cable from grommet in
tunnel.
14. Remove 4 bolts securing rear propeller shaft
guard. Remove guard.
15. Mark flanges on propeller shafts and transfer
box to aid reassembly.
16. Raise one wheel on each axle to allow rotation
of propeller shafts.
17. Remove fixings securing shafts to transfer box.
Release shafts. Tie aside.
18. Automatic Vehicles.Disconnect gear selector
cable trunnion from gearbox lever. Remove 2
bolts securing selector cable abutment bracket
to gearbox. Place selector cable aside.
