75 - SUPPLEMENTARY RESTRAINT SYSTEM (AIRBAG STORAGE): DESCRIPTION AND OPERATION
- Make
- Land Rover
- Model
- Range Rover Classic
- Section
- DESCRIPTION AND OPERATION › AIRBAG STORAGE
SUPPLEMENTARY RESTRAINT SYSTEM
5
DESCRIPTION AND OPERATION
AIRBAG STORAGE
Temporary storage
For temporary storage of the airbag module during
service, observe the following precautions:
Store the airbag module with the pad surface up.
Place the airbag module in designated storage area.
If no designated storage area is available, the module
may be stored in the boot of the vehicle from which it
was removed. Always lock the boot when module is
stored in it and inform workshop supervisor.
WARNING: If the airbag is improperly
stored face down, accidental deployment
could propel the unit with enough force to
cause serious injury.
Store the removed airbag module on a secure flat
surface away from heat, oil, grease, detergent or
water.
CAUTION: Improper handling or storage
can internally damage the airbag module,
making it inoperative. If you suspect the
airbag module has been damaged, install a new
unit.
Overnight storage
Airbag modules are classed as an explosive article
and as such they must be stored in a secure steel
cabinet which has been approved by the local
authority.
Parts & tools for this job For Land Rover Range Rover
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.