Range Rover Classic
75
SUPPLEMENTARY RESTRAINT SYSTEM
12
REPAIR
3. Knee bolster (where fitted); Remove 4 screws
and withdraw kneebolster.
4. Release airbag harness to column harness
connector from bracket.
5. Disconnect airbag harness connector from
column harness.
WARNING: Ensure tool is not connected to
battery.
6. Connect flylead SMD 4082/5 to column harness
connector.
7. Connect flylead SMD 4082/5 to tool SMD
4082/1.
WARNING: Ensure airbag module is
secure within steering wheel.
8. Connect tool SMD 4082/1 to battery.
WARNING: Ensure all personnel are
standing at least 15 metres away from
vehicle.
9. Press both operating buttons to deploy airbag
module.
10. DO NOT return to airbag module for 30 minutes.
11. Using gloves and face mask, remove airbag
module from steering wheel, place airbag
module in plastic bag and seal bag.
12. Transport deployed airbag module to designated
area for incineration.
NOTE: DO NOT transport airbag module in
the vehicle passenger compartment.
13. Scrap all remaining parts of airbag system.
DO NOT re-use or salvage any parts of the
airbag system including steering wheel.