Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 Information04 Maintenance05 Engine06 Engine management system - MEMS07 Cooling system08 Manifold & exhaust systems09 Clutch10 Manual gearbox11 Automatic gearbox - EM-CVT12 Drive shafts13 Steering14 Suspension15 Brakes16 Restraint systems17 Body18 Heating & ventilation19 Air conditioning20 Wipers & washers21 Electrical22 Instruments
MG MGF Factory Workshop Manual (1995-2000)17 · Body
17 · Body & interior

Gear lever gaiter - 2000my on

Make
MG
Model
MGF Factory Workshop Manual
Year
1995–2000
Section
Interior trim components › Gear lever gaiter - 2000my on
BodyGear lever gaiter - 2000my on

GEAR LEVER GAITER - 2000MY ON

Service repair no - 76.25.06

Remove

Gear lever gaiter - 2000my on – Service repair no - 76.25.06
  1. Manual models: Unscrew and remove gear knob.
  2. Steptronic EM-CVT models: Select position ’D’, pull gear selector lever sharply upwards and remove.
  3. All models: Release gaiter from centre console.
Gear lever gaiter - 2000my on – All models: Release gaiter from centre console.
  1. Steptronic EM-CVT models: Disconnect gearshift selector indicator multiplug
  2. Remove 2 screws securing gearshift selector indicator and remove selector indicator.
  3. All models: Remove gaiter.

Refit

  1. Position gaiter.
  2. Steptronic EM-CVT models: Fit gearshift selector indicator and secure with screws.
  3. Connect multiplug to selector indicator.
  4. All models: Secure gaiter to centre console.
  5. Fit gear change selector knob.

Parts & tools for this job For 1995 MG MGF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.