Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 Information04 Maintenance05 Engine06 Engine management system - MEMS07 Cooling system08 Manifold & exhaust systems09 Clutch10 Manual gearbox11 Automatic gearbox - EM-CVT12 Drive shafts13 Steering14 Suspension15 Brakes16 Restraint systems17 Body18 Heating & ventilation19 Air conditioning20 Wipers & washers21 Electrical22 Instruments
MG MGF Factory Workshop Manual (1995-2000)17 · Body
17 · Body & interior

Centre console panel - 2000my on

Make
MG
Model
MGF Factory Workshop Manual
Year
1995–2000
Section
Interior trim components › Centre console panel - 2000my on
BodyCentre console panel - 2000my on · page 1 of 2
Diagram
  1. Release 6 multiplugs from switches.
  2. Release gaiter from gear lever and remove centre console.

Refit

  1. Position console and engage gaiter to gear lever.
  2. Connect multiplugs, Lucars and bulb holder.
  3. Secure console clips to fascia.
  4. Fit gear knob.
  5. Fit radio. See ELECTRICAL, Repairs.
  6. Connect battery earth lead.

CENTRE CONSOLE PANEL - 2000MY ON

Service repair no - 76.25.23

Remove

  1. Disconnect battery earth lead.
  2. Remove radio. See ELECTRICAL, Repairs.
  3. Remove gear lever gaiter. See this section.
Centre console panel - 2000my on – Remove gear lever gaiter. See this section.
  1. Release 5 clips securing console to fascia.

Parts & tools for this job For 1995 MG MGF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.