Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 Information04 Maintenance05 Engine06 Engine management system - MEMS07 Cooling system08 Manifold & exhaust systems09 Clutch10 Manual gearbox11 Automatic gearbox - EM-CVT12 Drive shafts13 Steering14 Suspension15 Brakes16 Restraint systems17 Body18 Heating & ventilation19 Air conditioning20 Wipers & washers21 Electrical22 Instruments
MG MGF Factory Workshop Manual (1995-2000)17 · Body
17 · Body & interior

Centre console panel - 2000my on (page 2 of 2)

Make
MG
Model
MGF Factory Workshop Manual
Year
1995–2000
Section
Interior trim components
BodyCentre console panel - 2000my on · page 2 of 2
Diagram
  1. Release 3 Lucars from clock.
  2. Release multiplug and bulb holder from oil temperature gauge.
  3. Release hazard switch multiplug.
Release hazard switch multiplug.
  1. Release multiplugs from switches.
  2. Remove centre console panel.

Refit

  1. Position console and connect multiplugs, Lucars and bulb holder.
  2. Secure console clips to fascia.
  3. Fit gear lever gaiter. See this section.
  4. Fit radio. See ELECTRICAL, Repairs.
  5. Connect battery earth lead.

Parts & tools for this job For 1995 MG MGF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.