Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 Information04 Maintenance05 Engine06 Engine management system - MEMS07 Cooling system08 Manifold & exhaust systems09 Clutch10 Manual gearbox11 Automatic gearbox - EM-CVT12 Drive shafts13 Steering14 Suspension15 Brakes16 Restraint systems17 Body18 Heating & ventilation19 Air conditioning20 Wipers & washers21 Electrical22 Instruments
MG MGF Factory Workshop Manual (1995-2000)17 · Body
17 · Body & interior

Squab pad

Make
MG
Model
MGF Factory Workshop Manual
Year
1995–2000
Section
Interior trim components › Squab pad
BodySquab pad · page 1 of 2

SQUAB PAD

Service repair no - 78.90.49

WARNING: See RESTRAINT SYSTEMS, Precautions.

Remove

  1. Make the SRS system safe.See RESTRAINT SYSTEMS, Precautions.
  2. Remove squab cover. See this section.
  3. Remove squab pad from frame.

Refit

  1. Fit squab pad to frame.
  2. Fit squab cover. See this section.

SQUAB PAD - CENTRE

Service repair no - 78.90.50

WARNING: See RESTRAINT SYSTEMS, Precautions.

Remove

  1. Make the SRS system safe.See RESTRAINT SYSTEMS, Precautions.

CAUTION: Ensure pre-tensioner multiplug is disconnected before seat is removed.

  1. Remove seat. See this section.
Squab pad - centre – Remove seat. See this section.
  1. Release squab cover, lower retainer.
  2. Raise squab centre panel.

Parts & tools for this job For 1995 MG MGF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.