Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 Information04 Maintenance05 Engine06 Engine management system - MEMS07 Cooling system08 Manifold & exhaust systems09 Clutch10 Manual gearbox11 Automatic gearbox - EM-CVT12 Drive shafts13 Steering14 Suspension15 Brakes16 Restraint systems17 Body18 Heating & ventilation19 Air conditioning20 Wipers & washers21 Electrical22 Instruments
MG MGF Factory Workshop Manual (1995-2000)17 · Body
17 · Body & interior

Squab pad (page 2 of 2)

Make
MG
Model
MGF Factory Workshop Manual
Year
1995–2000
Section
Interior trim components
BodySquab pad · page 2 of 2
Diagram
  1. Remove 12 Hog rings securing squab cover to centre pad.
  2. Remove seat squab, centre pad.

Refit

  1. Position seat squab, centre pad.
  2. Secure squab cover to centre pad with hog rings.
  3. Position squab centre panel.
  4. Secure squab cover, lower retainer.
  5. Fit seat. See this section.

Parts & tools for this job For 1995 MG MGF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.