Workshop Manuals Factory service & repair Mini
Mini Mini Workshop Manual (1996-2000)15 · Brakes
15 · Brakes

Pressure reducing valve

Make
Mini
Model
Mini Workshop Manual
Year
1996–2000
Section
Repairs › Pressure reducing valve
BrakesPressure reducing valve · page 1 of 2

PRESSURE REDUCING VALVE

Service repair no - 70.25.21

Remove

  1. Remove ECM. See ENGINE MANAGEMENT SYSTEM - MEMS, Repairs.
Pressure reducing valve – Remove ECM. See ENGINE MANAGEMENT SYSTEM - MEMS, Repairs.
  1. Release engine compartment fuse box from ECM mounting bracket.
Pressure reducing valve – Release engine compartment fuse box from ECM mounting bracket.
  1. Release clip securing main harness to ECM mounting bracket.
  2. Remove bolt securing ECM mounting bracket to body.
  3. Release ECM mounting bracket from body and remove.
  4. Position cloth beneath valve to absorb spilled fluid.

CAUTION: Do not allow brake fluid to contact paint finished surfaces as paint may be damaged. If spilled, remove fluid and clean area with clean warm water.

Parts & tools for this job For 1996 Mini Mini

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.