18.INSPECT PRELOAD - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 18.INSPECT PRELOAD - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
18.INSPECT PRELOAD

18.INSPECT PRELOAD
a.

Manual Transmission Output Shaft Rear Set *1 Nut *2 Rear Output Shaft Bearing *3 Output Shaft Spacer *4 Rear Output Shaft Bearing Shim
Temporarily install the output shaft, rear output shaft bearing shim, output shaft spacer, rear output shaft bearing and a new manual transmission output shaft rear set nut to the rear transmission case sub- assembly.
NOTICE:
· Do not apply gear oil to a new output shaft bearing and rear output shaft bearing. If applied, the turning torque cannot be accurately measured.
· If the turning torque is not properly measured, the output shaft bearing may generate abnormal noise and become damaged.
b.

*a Hold *b Turn
Temporarily install the manual transmission output shaft rear set nut to the output shaft. SST 09326-71010 09326-71030
Parts & tools for this job For Toyota Hilux
- PARTClutch kitSearch: Toyota Hilux clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Hilux manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.