6.INSTALL NEEDLE ROLLER BEARING - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 6.INSTALL NEEDLE ROLLER BEARING - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev 5.INSTALL NO. 2 GEAR SHIFT FORK SHAFT - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › a. *1 Needle Roller Bearing *2 Shift Arm Using SST and a - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
MANUAL TRANSMISSION UNIT6.INSTALL NEEDLE ROLLER BEARING - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
6.INSTALL NEEDLE ROLLER BEARING
Standard depth: 0 to 0.5 mm (0 to 0.0196 in.)
NOTICE: Secure the gear shift head with the new slotted pin from the side as shown in the illustration.
c.

Install the No. 2 gear shift fork shaft to the No. 1 gear shift fork head.
d.

Install the No. 2 gear shift fork to the No. 2 gear shift fork shaft with a new bolt. Torque:
19.5 N*m (199 kgf*cm, 14 ft.*lbf)
NOTICE: Secure the shift fork with the bolt from the side as shown in the illustration.
33243G
6.INSTALL NEEDLE ROLLER BEARING
‹ Prev 5.INSTALL NO. 2 GEAR SHIFT FORK SHAFT - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › a. *1 Needle Roller Bearing *2 Shift Arm Using SST and a - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- PARTClutch kitSearch: Toyota Hilux clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Hilux manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.