25.INSTALL REVERSE IDLER GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 25.INSTALL REVERSE IDLER GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev 19.5 N*m (199 kgf*cm, 14 ft.*lbf) NOTICE: · Securely - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › b. Install the No. 3 oil receiver pipe to the rear - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
MANUAL TRANSMISSION UNIT25.INSTALL REVERSE IDLER GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
25.INSTALL REVERSE IDLER GEAR
Install the shift fork shaft to the depression of SST.
33461
25.INSTALL REVERSE IDLER GEAR
a.

Coat the reverse idler gear with the gear oil.
b. Install the reverse idler gear and reverse idler gear bearing to the reverse idler gear shaft.
c.

Install the No. 2 oil receiver pipe to the reverse idler gear shaft.
33101
26.INSTALL MANUAL TRANSMISSION CASE SUB-ASSEMBLY
a.

Install the manual transmission oil separator sub-assembly (rear side) to the transmission unit.
‹ Prev 19.5 N*m (199 kgf*cm, 14 ft.*lbf) NOTICE: · Securely - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › b. Install the No. 3 oil receiver pipe to the rear - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- PARTClutch kitSearch: Toyota Hilux clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Hilux manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.