39.INSTALL SHAFT DETENT BALL - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 39.INSTALL SHAFT DETENT BALL - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
39.INSTALL SHAFT DETENT BALL

a.

Install the lock ball pin and compression spring to the rear transmission case.
b. Using a 10 mm hexagon wrench, install a new No. 2 with head straight screw plug to the rear transmission case. Torque:
24.5 N*m (250 kgf*cm, 18 ft.*lbf)
33275B
39.INSTALL SHAFT DETENT BALL
a.

Install the 4 shaft detent balls and 4 shift detent ball compression springs to the rear transmission case.
b. Using a 6 mm hexagon wrench, install 4 new shift detent ball plugs to the rear transmission case. Torque: 22 N*m (224 kgf*cm, 16 ft.*lbf)
33111A
40.INSTALL MANUAL TRANSMISSION CASE PLUG
a.

Parts & tools for this job For Toyota Hilux
- PARTClutch kitSearch: Toyota Hilux clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Hilux manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.