38.INSTALL LOCK BALL PIN - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 38.INSTALL LOCK BALL PIN - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
38.INSTALL LOCK BALL PIN

a.

*1 Inner Shift Lever *2 Shift Lever Housing *3 Control Shift Lever Shaft
MP grease
Gear oil
Apply MP grease to the tip of the inner shift lever.
b. Apply gear oil to the control shift lever shaft.
c. Install the control shift lever retainer assembly and a new control shift lever retainer gasket on the extension housing sub-assembly, making sure that the inner shift lever is properly set on the shift lever housing.
d.

Install the floor shift control shift lever retainer sub-assembly to the extension housing sub-assembly with the 4 bolts. Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)
33292A
38.INSTALL LOCK BALL PIN
Parts & tools for this job For Toyota Hilux
- PARTClutch kitSearch: Toyota Hilux clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Hilux manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.