23.INSTALL OUTPUT SHAFT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 23.INSTALL OUTPUT SHAFT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev 21.INSTALL NO. 4 SYNCHRONIZER RING - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › a. Install in this direction Move the 2 sleeves shown in - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
MANUAL TRANSMISSION UNIT23.INSTALL OUTPUT SHAFT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
23.INSTALL OUTPUT SHAFT

b.

Install the input shaft bearing to the transmission unit.
33321
23.INSTALL OUTPUT SHAFT
a.

Gear Oil
Coat the output shaft with the gear oil as shown in the illustration.
b. Install the output shaft to the transmission unit.
c.

Contract SST and connect the input shaft to the counter gear.
24.INSTALL SHIFT FORK AND SHIFT FORK SHAFT ASSEMBLY
‹ Prev 21.INSTALL NO. 4 SYNCHRONIZER RING - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › a. Install in this direction Move the 2 sleeves shown in - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- PARTClutch kitSearch: Toyota Hilux clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Hilux manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.