Starter Sig. - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Starter Sig. - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Starter Sig.
ES–274
1GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM

NG
REPLACE PARK / NEUTRAL POSITION
SWITCH ASSEMBLY (THEN CHECK
CRANKING HOLDING FUNCTION CIRCUIT)
3
READ VALUE OF INTELLIGENT TESTER (STARTER SIGNAL)
(a) Connect an intelligent tester to the DLC3. (b) Turn the ignition switch ON and turn the tester ON. (c) Select the following menu items: DIAGNOSIS /
ENHANCED OBD II / DATA LIST / PRIMARY /
ES
STARTER SIG.
(d) Check the value displayed on the tester when the ignition switch is turned to ON and START positions.
| Ignition Switch Positions | ON | START |
|---|---|---|
| STARTER SIG | OFF | ON |
SYSTEM OK
NG
4
INSPECT IGNITION OR STARTER SWITCH ASSEMBLY
(a) Disconnect the I7 ignition switch connector. Component Side: (b) Check the resistance. Standard Resistance I7

| Ignition Switch Positions | Tester Connections | Specified Conditions |
|---|---|---|
| LOCK | All Terminals | 10 kΩ or higher |
| ACC | 2 - 4 | Below 1 Ω |
| ON | 1 - 2, 1 - 4, 5 - 6 | |
| START | 1 - 3, 1 - 4, 3 - 4, 5 - 6, 5 - 7, 6 - 7 |
Ignition Switch A056879E22 (c) Reconnect the ignition switch connector. NG
REPLACE IGNITION OR STARTER SWITCH
ASSEMBLY
5
READ VALUE OF INTELLIGENT TESTER (STARTER SIGNAL)
(a) Connect an intelligent tester to the DLC3. (b) Turn the ignition switch ON and turn the tester ON. (c) Select the following menu items: DIAGNOSIS /
ENHANCED OBD II / DATA LIST / PRIMARY /
STARTER SIG.
(d) Check the value displayed on the tester when the ignition switch is turned to ON and START positions.
Parts & tools for this job For Toyota Hilux
- TOOLBattery testerSearch: car battery tester
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBattery terminal cleanerSearch: battery terminal cleaner
As an Amazon Associate we earn from qualifying purchases.