Ocv Off - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Ocv Off - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Ocv Off
ES–79
2TR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM

1 CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0011 OR P0012) (a) Connect an intelligent tester to the DLC3. (b) Turn the ignition switch to ON and turn the tester ON. (c) Select the following menu items: DIAGNOSIS /
ENHANCED OBD II / DTC INFO / CURRENT CODES.
(d) Read DTCs. Result Display (DTC output) Proceed To P0011 or P0012 A P0011 or P0012 and other DTCs B
HINT: ES If any DTCs other than P0011 or P0012 are output, troubleshoot those DTCs first. B
GO TO DTC CHART
A
2
PERFORM ACTIVE TEST USING INTELLIGENT TESTER (OPERATE OCV)
(a) Connect the intelligent tester to the DLC3. (b) Start the engine and turn the tester ON. (c) Warm up the engine. (d) On the tester, select the following menu items:
DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST /
VVT CTRL B1.
(e) Check the engine speed while operating the Oil Control Valve (OCV) using the tester. Result Tester Operations Specified Conditions
OCV OFF
Normal engine speed Engine idles roughly or stalls OCV ON (soon after OCV switched from OFF to ON) NG Go to step 4
3 CHECK WHETHER DTC OUTPUT RECURS (DTC P0011 OR P0012) (a) Connect the intelligent tester to the DLC3. (b) Turn the ignition switch to ON and turn the tester ON. (c) Clear DTCs (see page ES-40). (d) Start the engine and warm it up. (e) Switch the ECM from normal mode to check mode using the tester (see page ES-43). (f) Drive the vehicle for more than 10 minutes. (g) Read DTCs using the tester.
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.