Evap Vsv - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Evap Vsv - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Evap Vsv
ES–39
2TR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM

6.
WAVEFORM 6

0.2 V/DIV Heated oxygen sensor
| ECM Terminal Names | Between OX1B and E2 |
|---|---|
| Tester Ranges | 0.2 V/DIV, 200 msec./DIV |
| Conditions | Engine speed maintained 2,500 rpm for 2 minutes after warming up engine |
HINT: GND In the DATA LIST, item O2S B1S2 shows the ECM input 200 msec./DIV values from the heated oxygen sensor. A088863E14
7.
WAVEFORM 7

Knock sensor ES GND
| ECM Terminal Names | Between KNK1 and EKNK |
|---|---|
| Tester Ranges | 0.01 to 10 V/DIV, 0.01 to 10 msec./DIV |
| Conditions | Engine speed maintained 4,000 rpm after warming up engine |
HINT:
• The wavelength becomes shorter as the engine rpm increases. A082985E13
• The waveforms and amplitudes displayed differ slightly depending on the vehicle.
8.
WAVEFORM 8

Camshaft timing oil control valve (OCV) 5 V/DIV
| ECM Terminal Names | Between OC1+ and OC1- |
|---|---|
| Tester Ranges | 5 V/DIV, 1 msec./DIV |
| Conditions | Idling |
GND
HINT: The wavelength becomes shorter as the engine rpm increases. 1 msec./DIV A093229E10
9.
WAVEFORM 9

EVAP VSV
5 V/DIV
| ECM Terminal Names | Between PRG and E01 |
|---|---|
| Tester Ranges | 5 V/DIV, 50 msec./DIV |
| Conditions | Idling |
GND
HINT: If the waveform is not similar to the illustration, check the waveform again after idling for 10 minutes or more. 50 msec./DIV A093230E05
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.