System Piping - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- System Piping - Toyota Hilux Generation 7 2005-2010 Workshop Manual
System Piping
ES–382
2TR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM

5
INSPECT ECM (AIP VOLTAGE)
(a) Connect a pressure gauge to the air pressure sensor as Pressure Gauge shown in the illustration. (b) Connect the intelligent tester to the DLC3. Pressure Sensor (c) Turn the ignition switch to ON and the tester ON. (d) Select the following menu items: DIAGNOSIS / ENHANCED OBD ll / DATA LIST / AIR PMP PRS(A). (e) Check that the pressure displayed on the tester fluctuates when applying the pressure to the pressure sensor with the pressure gauge. ES OK: G034995E02 Pressure fluctuates in response to pressure applied with pressure gauge.

HINT: The tester displays the air pump pressure (AIR PMP PRS(A)) as absolute pressure. NG
REPLACE PRESSURE SENSOR (TURBO
PRESSURE SENSOR)
6
CHECK AIR INJECTION SYSTEM PIPE CONNECTIONS
Pressure Sensor Air Switching Valve
Air Pump
A121763E01 (a) Check that all the pipes and hoses between the air pump and ASV are securely connected. (b) Inspect the pipes and hoses for blockages and damage. OK: AIR system piping has no blockages or damage. NG
REPAIR OR REPLACE AIR INJECTION
SYSTEM PIPING
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.