Approximately 4 ? - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Approximately 4 ? - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Approximately 4 Ω
AV–53
AUDIO / VISUAL – AUDIO AND VISUAL SYSTEM

2
CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - SPEAKER
ASSEMBLY) (a)
Disconnect the R2 and R1 radio receiver assembly
connectors. AV (b)
Disconnect the speaker connectors.
(c)
Check the resistance.
RL- Standard FR- FL- Tester Connection Specified Condition R2 Below 1Ω FL+ (R1-2) - S19-4 RR- R1 Below 1Ω FL- (R1-6) - S19-3 Below 1Ω FR+ (R1-1) - S20-4 Below 1Ω FR- (R1-5) - S20-3 Below 1Ω S19-1 - S15-2 FL+ RR+ Below 1Ω S19-2 - S15-1 RL+ FR+ Below 1Ω S20-1 - S16-2 Connector Front View: Below 1Ω S20-2 - S16-1 (Front No. 1 Speaker Assembly) Below 1Ω RL+ (R2-2) - S17-1 (Rear Speaker Assembly) Below 1Ω RL- (R2-6) - S17-2 Below 1Ω RR+ (R2-1) - S18-1 Below 1Ω RR- (R2-3) - S18-2 S15 10 kΩ or higher FL+ (R1-2) - Body ground S16 10 kΩ or higher FL- (R1-6) - Body ground 1 S17 10 kΩ or higher FR+ (R1-1) - Body ground 2 10 kΩ or higher FR- (R1-5) - Body ground S18 10 kΩ or higher RL+ (R2-2) - Body ground 10 kΩ or higher RL- (R2-6) - Body ground 10 kΩ or higher RR+ (R2-1) - Body ground 10 kΩ or higher RR- (R2-3) - Body ground Connector Front View: (Front No. 2 Speaker Assembly) NG
REPAIR OR REPLACE HARNESS OR
CONNECTOR S19 1 2 3 4 S20
I101945E02
3
INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
(a)
Measure the resistance between the terminals of the
speaker.
NOTICE:
The speaker should not be removed for checking.
Standard:
Approximately 4 Ω
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.