Dtc Clear - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Dtc Clear - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Dtc Clear
AV–28
AUDIO / VISUAL – AUDIO AND VISUAL SYSTEM
(3) Displayed items in detailed information mode
| Division Code for DTC display | Description | The order of detailed information displayed when the TUNE UP switch is pressed. (The order is reversed when the TUNE DOWN switch is pressed.) |
|---|---|---|
| SYS | System check result is displayed. | Logical address → DTC |
| CODE | Diagnostic memory check result is displayed. | Logical address → DTC → Sub code → Connection confirmation number → The number of times of occurrence |
AV
(4) Check the trouble area referring to the DTC list. (5) To return to the service check mode, press the preset switch 3ch.
2.
DTC CLEAR
(a) Clearing an individual DTC memory (when clearing the memory of the DTC detected in the past individually) (1) Press the preset switch 5ch for 2 seconds or more while ECHN is displayed in service check mode or detailed information mode.
HINT:
• A beep sound is emitted once when the DTC memory is completely cleared.
• When the DTC memory is cleared, only the component code (physical address) is displayed for the target component.
• To check DTCs, press the preset switch 1ch and perform the service check again. (b) Clearing all the DTC memories (when clearing all the memories of DTCs detected in the past) (1) Start diagnostic mode after repairing the trouble area. (2) Press the preset switch 5ch for 2 seconds or more (CLR is displayed at this time).
HINT:
• A beep sound is emitted once when the DTC memories are completely cleared.
• When the DTC memories for all the components are cleared, only the component codes (physical address) are displayed. (3) Press the preset switch 1ch to perform the service check again, and check that no DTCs are displayed for any component codes (physical address). (c) Finish diagnostic mode (1) Press DISC for 2 seconds or more, or turn the ignition switch off.
Parts & tools for this job For Toyota Hilux
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.